Economics (/ɛkəˈnɒmɪks,
Economics focuses on the behaviour and interactions of economic agents and how economies work. Microeconomics analyzes basic elements in the economy, including individual agents and markets, their interactions, and the outcomes of interactions. Individual agents may include, for example, households, firms, buyers, and sellers. Macroeconomics analyzes the entire economy (meaning aggregated production, consumption, savings, and investment) and issues affecting it, including unemployment of resources (labour, capital, and land), inflation, economic growth, and the public policies that address these issues (monetary, fiscal, and other policies). See glossary of economics.
Other broad distinctions within economics include those between positive economics, describing "what is", and normative economics, advocating "what ought to be"; between economic theory and applied economics; between rational and behavioural economics; and between mainstream economics and heterodox economics.
Term
The discipline was renamed in the late 19th century primarily due to Alfred Marshall from "political economy" to "economics" as a shorter term for "economic science". At that time, it became more open to rigorous thinking and made increased use of mathematics, which helped support efforts to have it accepted as a science and as a separate discipline outside of political science and other social sciences.
Economic analysis can be applied throughout society, in business, finance, health care, and government. Economic analysis is sometimes also applied to such diverse subjects as crime, education, the family, law, politics, religion, social institutions, war, science, and the environment.
Definitions
There are a variety of modern definitions of economics; some reflect evolving views of the subject or Scottish philosopher Adam Smith (1776) defined what was then called political economy as "an inquiry into the nature and causes of the wealth of nations", in particular as:
different views among economists.a branch of the science of a statesman or legislator [with the twofold objectives of providing] a plentiful revenue or subsistence for the people ... [and] to supply the state or commonwealth with a revenue for the publick services.
Jean-Baptiste Say (1803), distinguishing the subject from its public-policy uses, defines it as the science of production, distribution, and consumption of wealth. On the satirical side, Thomas Carlyle (1849) coined "the dismal science" as an epithet for classical economics, in this context, commonly linked to the pessimistic analysis of Malthus (1798). John Stuart Mill (1844) defines the subject in a social context as:
Alfred Marshall provides a still widely cited definition in his textbook Principles of Economics (1890) that extends analysis beyond wealth and from the societal to the microeconomic level:
Lionel Robbins (1932) developed implications of what has been termed "[p]erhaps the most commonly accepted current definition of the subject":
Robbins describes the definition as not classificatory in "pick[ing] out certain kinds of behaviour" but rather analytical in "focus[ing] attention on a particular aspect of behaviour, the form imposed by the influence of scarcity." He affirmed that previous economists have usually centred their studies on the analysis of wealth: how wealth is created (production), distributed, and consumed; and how wealth can grow. But he said that economics can be used to study other things, such as war, that are outside its usual focus. This is because war has as the goal winning it (as a sought after end), generates both cost and benefits; and, resources (human life and other costs) are used to attain the goal. If the war is not winnable or if the expected costs outweigh the benefits, the deciding actors (assuming they are rational) may never go to war (a decision) but rather explore other alternatives. We cannot define economics as the science that studies wealth, war, crime, education, and any other field economic analysis can be applied to; but, as the science that studies a particular common aspect of each of those subjects (they all use scarce resources to attain a sought after end).
Some subsequent comments criticized the definition as overly broad in failing to limit its subject matter to analysis of markets. From the 1960s, however, such comments abated as the economic theory of maximizing behaviour and rational-choice modelling expanded the domain of the subject to areas previously treated in other fields. There are other criticisms as well, such as in scarcity not accounting for the macroeconomics of high unemployment.
Gary Becker, a contributor to the expansion of economics into new areas, describes the approach he favours as "combin[ing the] assumptions of maximizing behaviour, stable preferences, and market equilibrium, used relentlessly and unflinchingly." One commentary characterizes the remark as making economics an approach rather than a subject matter but with great specificity as to the "choice process and the type of social interaction that [such] analysis involves." The same source reviews a range of definitions included in principles of economics textbooks and concludes that the lack of agreement need not affect the subject-matter that the texts treat. Among economists more generally, it argues that a particular definition presented may reflect the direction toward which the author believes economics is evolving, or should evolve.
Microeconomics
Markets
Microeconomics examines how entities, forming a market structure, interact within a market to create market system. These entities include private and public players with various classifications, typically operating under scarcity of tradable units and light government regulation.[clarification needed] The item traded may be a tangible product such as apples or a service such as repair services, legal counsel, or entertainment.
In theory, in a free market the aggregates (sum of) of quantity demanded by buyers and quantity supplied by sellers may reach economic equilibrium over time in reaction to price changes; in practice, various issues may prevent equilibrium, and any equilibrium reached may not necessarily be morally equitable. For example, if the supply of healthcare services is limited by external factors, the equilibrium price may be unaffordable for many who desire it but cannot pay for it.
Various market structures exist. In perfectly competitive markets, no participants are large enough to have the market power to set the price of a homogeneous product. In other words, every participant is a "price taker" as no participant influences the price of a product. In the real world, markets often experience imperfect competition.
Forms include monopoly (in which there is only one seller of a good), duopoly (in which there are only two sellers of a good), oligopoly (in which there are few sellers of a good), monopolistic competition (in which there are many sellers producing highly differentiated goods), monopsony (in which there is only one buyer of a good), and oligopsony (in which there are few buyers of a good). Unlike perfect competition, imperfect competition invariably means market power is unequally distributed. Firms under imperfect competition have the potential to be "price makers", which means that, by holding a disproportionately high share of market power, they can influence the prices of their products.
Microeconomics studies individual markets by simplifying the economic system by assuming that activity in the market being analysed does not affect other markets. This method of analysis is known as partial-equilibrium analysis (supply and demand). This method aggregates (the sum of all activity) in only one market. General-equilibrium theory studies various markets and their behaviour. It aggregates (the sum of all activity) across all markets. This method studies both changes in markets and their interactions leading towards equilibrium.
Production, cost, and efficiency
In microeconomics, production is the conversion of inputs into outputs. It is an economic process that uses inputs to create a commodity or a service for exchange or direct use. Production is a flow and thus a rate of output per period of time. Distinctions include such production alternatives as for consumption (food, haircuts, etc.) vs. investment goods (new tractors, buildings, roads, etc.), public goods (national defence, smallpox vaccinations, etc.) or private goods (new computers, bananas, etc.), and "guns" vs "butter".
Opportunity cost is the economic cost of production: the value of the next best opportunity foregone. Choices must be made between desirable yet mutually exclusiveactions. It has been described as expressing "the basic relationship between scarcity and choice".[30] For example, if a baker uses a sack of flour to make pretzels one morning, then the baker cannot use either the flour or the morning to make bagels instead. Part of the cost of making pretzels is that neither the flour nor the morning are available any longer, for use in some other way. The opportunity cost of an activity is an element in ensuring that scarce resources are used efficiently, such that the cost is weighed against the value of that activity in deciding on more or less of it. Opportunity costs are not restricted to monetary or financial costs but could be measured by the real cost of output forgone, leisure, or anything else that provides the alternative benefit (utility).[31]
Inputs used in the production process include such primary factors of production as labour services, capital (durable produced goods used in production, such as an existing factory), and land (including natural resources). Other inputs may include intermediate goods used in production of final goods, such as the steel in a new car.
Economic efficiency measures how well a system generates desired output with a given set of inputs and available technology. Efficiency is improved if more output is generated without changing inputs, or in other words, the amount of "waste" is reduced. A widely accepted general standard is Pareto efficiency, which is reached when no further change can make someone better off without making someone else worse off.
The production–possibility frontier (PPF) is an expository figure for representing scarcity, cost, and economy can produce just two goods (say "guns" and "butter"). The PPF is a table or graph (as at the right) showing the different quantity combinations of the two goods producible with a given technology and total factor inputs, which limit feasible total output. Each point on the curve shows potential total output for the economy, which is the maximum feasible output of one good, given a feasible output quantity of the other good.
efficiency. In the simplest case an
Scarcity is represented in the figure by people being willing but unable in the aggregate to consume beyond the PPF (such as at X) and by the negative slope of the curve.[32] If production of one good increases along the curve, production of the other good decreases, an inverse relationship. This is because increasing output of one good requires transferring inputs to it from production of the other good, decreasing the latter.
The slope of the curve at a point on it gives the trade-off between the two goods. It measures what an additional unit of one good costs in units forgone of the other good, an example of a real opportunity cost. Thus, if one more Gun costs 100 units of butter, the opportunity cost of one Gun is 100 Butter. Along the PPF, scarcity implies that choosing more of one good in the aggregate entails doing with lessof the other good. Still, in a market economy, movement along the curve may indicate that the choice of the increased output is anticipated to be worth the cost to the agents.
By construction, each point on the curve shows productive efficiency in maximizing output for given total inputs. A point inside the curve (as at A), is feasible but represents production inefficiency (wasteful use of inputs), in that output of one or both goods could increase by moving in a northeast direction to a point on the curve. Examples cited of such inefficiency include high unemployment during a business-cycle recession or economic organization of a country that discourages full use of resources. Being on the curve might still not fully satisfy allocative efficiency (also called Pareto efficiency) if it does not produce a mix of goods that consumers prefer over other points.
Much applied economics in public policy is concerned with determining how the efficiency of an economy can be improved. Recognizing the reality of scarcity and then figuring out how to organize society for the most efficient use of resources has been described as the "essence of economics", where the subject "makes its unique contribution.
Specialization
Specialization is considered key to economic efficiency based on theoretical empirical considerations. Different individuals or nations may have different real opportunity costs of production, say from differences in stocks of human capital per worker or capital/labour ratios. According to theory, this may give a comparative advantage in production of goods that make more intensive use of the relatively more abundant, thus relatively cheaper, input.
and
Even if one region has an absolute advantage as to the ratio of its outputs to inputs in every type of output, it may still specialize in the output in which it has a comparative advantage and thereby gain from trading with a region that lacks any absolute advantage but has a comparative advantage in producing something else.
It has been observed that a high volume of trade occurs among regions even with access to a similar technology and mix of factor inputs, including high-income countries. This has led to investigation of economies of scale and agglomeration to explain specialization in similar but differentiated product lines, to the overall benefit of respective trading parties or regions.[34]
The general theory of specialization applies to trade among individuals, farms, manufacturers, service providers, and economies. Among each of these production systems, there may be a corresponding division of labour with different work groups specializing, or correspondingly different types of capital equipment and differentiated land uses.[35]
An example that combines features above is a country that specializes in the production of high-tech knowledge products, as developed countries do, and trades with developing nations for goods produced in factories where labour is relatively cheap and plentiful, resulting in different in opportunity costs of production. More total output and utility thereby results from specializing in production and trading than if each country produced its own high-tech and low-tech products.
Theory and observation set out the conditions such that market prices of outputs and productive inputs select an allocation of factor inputs by comparative advantage, so that (relatively) low-cost inputs go to producing low-cost outputs. In the process, aggregate output may increase as a by-product or by design.[36] Such specialization of production creates opportunities for gains from trade whereby resource owners benefit from trade in the sale of one type of output for other, more highly valued goods. A measure of gains from trade is the increased income levels that trade may facilitate.
Supply and demand
Prices and quantities have been described as the most directly observable attributes of goods market economy.[38] The theory of supply and demand is an organizing principle for explaining how prices coordinate the amounts produced and consumed. In microeconomics, it applies to price and output determination for a market with perfect competition, which includes the condition of no buyers or sellers large enough to have price-setting power.
produced and exchanged in a
For a given market of a commodity, demand is the relation of the quantity that all buyers would be prepared to purchase at each unit price of the good. Demand is often represented by a table or a graph showing price and quantity demanded (as in the figure). Demand theory describes individual consumers as rationally choosing the most preferred quantity of each good, given income, prices, tastes, etc. A term for this is "constrained utility maximization" (with income and wealth as the constraints on demand). Here, utility refers to the hypothesized relation of each individual consumer for ranking different commodity bundles as more or less preferred.
The law of demand states that, in general, price and quantity demanded in a given market are inversely related. That is, the higher the price of a product, the less of it people would be prepared to buy (other things unchanged). As the price of a commodity falls, consumers move toward it from relatively more expensive goods (the substitution effect). In addition, purchasing power from the price decline increases ability to buy (the income effect). Other factors can change demand; for example an increase in income will shift the demand curve for a normal good outward relative to the origin, as in the figure. All determinants are predominantly taken as constant factors of demand and supply.
Supply is the relation between the price of a good and the quantity available for sale at that price. It may be represented as a table or graph relating price and quantity supplied. Producers, for example business firms, are hypothesized to be profit maximizers, meaning that they attempt to produce and supply the amount of goods that will bring them the highest profit. Supply is typically represented as a function relating price and quantity, if other factors are unchanged.
That is, the higher the price at which the good can be sold, the more of it producers will supply, as in the figure. The higher price makes it profitable to increase production. Just as on the demand side, the position of the supply can shift, say from a change in the price of a productive input or a technical improvement. The "Law of Supply" states that, in general, a rise in price leads to an expansion in supply and a fall in price leads to a contraction in supply. Here as well, the determinants of supply, such as price of substitutes, cost of production, technology applied and various factors inputs of production are all taken to be constant for a specific time period of evaluation of supply.
Market equilibrium occurs where quantity supplied equals quantity demanded, the intersection of the supply and demand curves in the figure above. At a price below equilibrium, there is a shortage of quantity supplied compared to quantity demanded. This is posited to bid the price up. At a price above equilibrium, there is a surplus of quantity supplied compared to quantity demanded. This pushes the price down. The model of supply and demand predicts that for given supply and demand curves, price and quantity will stabilize at the price that makes quantity supplied equal to quantity demanded. Similarly, demand-and-supply theory predicts a new price-quantity combination from a shift in demand (as to the figure), or in supply.
For a given quantity of a consumer good, the point on the demand curve indicates the value, or marginal utility, to consumers for that unit. It measures what the consumer would be prepared to pay for that unit.[39] The corresponding point on the supply curve measures marginal cost, the increase in total cost to the supplier for the corresponding unit of the good. The price in equilibrium is determined by supply and demand. In a perfectly competitive market, supply and demand equate marginal cost and marginal utility at equilibrium.[40]
On the supply side of the market, some factors of production are described as (relatively) variable in the short run, which affects the cost of changing output levels. Their usage rates can be changed easily, such as electrical power, raw-material inputs, and over-time and temp work. Other inputs are relatively fixed, such as plant and equipment and key personnel. In the long run, all inputs may be adjusted by management. These distinctions translate to differences in the elasticity(responsiveness) of the supply curve in the short and long runs and corresponding differences in the price-quantity change from a shift on the supply or demand side of the market.
Marginalist theory, such as above, describes the consumers as attempting to reach most-preferred positions, subject to income and wealth constraints while producers attempt to maximize profits subject to their own constraints, including demand for goods produced, technology, and the price of inputs. For the consumer, that point comes where marginal utility of a good, net of price, reaches zero, leaving no net gain from further consumption increases. Analogously, the producer compares marginal revenue (identical to price for the perfect competitor) against the marginal cost of a good, with marginal profit the difference. At the point where marginal profit reaches zero, further increases in production of the good stop. For movement to market equilibrium and for changes in equilibrium, price and quantity also change "at the margin": more-or-less of something, rather than necessarily all-or-nothing.
Other applications of demand and supply include the distribution of income among the factors of production, including labour and capital, through factor markets. In a competitive labour market for example the quantity of labour employed and the price of labour (the wage rate) depends on the demand for labour (from employers for production) and supply of labour (from potential workers). Labour economics examines the interaction of workers and employers through such markets to explain patterns and changes of wages and other labour income, labour mobility, and (un)employment, productivity through human capital, and related public-policy issues.[41]
Demand-and-supply analysis is used to explain the behaviour of perfectly competitive markets, but as a standard of comparison it can be extended to any type of market. It can also be generalized to explain variables across the economy, for example, total output (estimated as real GDP) and the general price level, as studied in macroeconomics.[42] Tracing the qualitative and quantitative effects of variables that change supply and demand, whether in the short or long run, is a standard exercise in applied economics. Economic theory may also specify conditions such that supply and demand through the market is an efficient mechanism for allocating resources.
Firms
People frequently do not trade directly on markets. Instead, on the supply side, they may work in and produce through firms. The most obvious kinds of firms are corporations, partnerships and trusts. According to Ronald Coase, people begin to organize their production in firms when the costs of doing business becomes lower than doing it on the market.[44] Firms combine labour and capital, and can achieve far greater economies of scale (when the average cost per unit declines as more units are produced) than individual market trading.
In perfectly competitive markets studied in the theory of supply and demand, there are many producers, none of which significantly influence price. Industrial organization generalizes from that special case to study the strategic behaviour of firms that do have significant control of price. It considers the structure of such markets and their interactions. Common market structures studied besides perfect competition include monopolistic competition, various forms of oligopoly, and monopoly.[45]
Managerial economics applies microeconomic analysis to specific decisions in business firms or other management units. It draws heavily from quantitative methods such as operations research and programming and from statistical methods such as regression analysis in the absence of certainty and perfect knowledge. A unifying theme is the attempt to optimize business decisions, including unit-cost minimization and profit maximization, given the firm's objectives and constraints imposed by technology and market conditions.
Uncertainty and game theory
Uncertainty in economics is an unknown prospect of gain or loss, whether quantifiable as risk or not. Without it, household behaviour would be unaffected by uncertain employment and income prospects, financial and capital markets would reduce to exchange of a single instrument in each market period, and there would be no communications industry.[47] Given its different forms, there are various ways of representing uncertainty and modelling economic agents' responses to it.[48]
Game theory is a branch of applied mathematics that considers strategic interactions between agents, one kind of uncertainty. It provides a mathematical foundationof industrial organization, discussed above, to model different types of firm behaviour, for example in an solipsistic industry (few sellers), but equally applicable to wage negotiations, bargaining, contract design, and any situation where individual agents are few enough to have perceptible effects on each other. In behavioural economics, it has been used to model the strategies agents choose when interacting with others whose interests are at least partially adverse to their own.[49]
In this, it generalizes maximization approaches developed to analyse market actors such as in the supply and demand model and allows for incomplete information of actors. The field dates from the 1944 classic Theory of Games and Economic Behavior by John von Neumann and Oskar Morgenstern. It has significant applications seemingly outside of economics in such diverse subjects as formulation of nuclear strategies, ethics, political science, and evolutionary biology.[50]
Risk aversion may stimulate activity that in well-functioning markets smooths out risk and communicates information about risk, as in markets for insurance, commodity futures contracts, and financial instruments. Financial economics or simply finance describes the allocation of financial resources. It also analyses the pricing of financial instruments, the financial structure of companies, the efficiency and fragility of financial markets,[51] financial crises, and related government policy or regulation.[52]
Some market organizations may give rise to inefficiencies associated with uncertainty. Based on George Akerlof's "Market for Lemons" article, the paradigm example is of a dodgy second-hand car market. Customers without knowledge of whether a car is a "lemon" depress its price below what a quality second-hand car would be.[53] Information asymmetry arises here, if the seller has more relevant information than the buyer but no incentive to disclose it. Related problems in insurance are adverse selection, such that those at most risk are most likely to insure (say reckless drivers), and moral hazard, such that insurance results in riskier behaviour (say more reckless driving).[54]
Both problems may raise insurance costs and reduce efficiency by driving otherwise willing transactors from the market ("incomplete markets"). Moreover, attempting to reduce one problem, say adverse selection by mandating insurance, may add to another, say moral hazard. Information economics, which studies such problems, has relevance in subjects such as insurance, contract law, mechanism design, monetary economics, and health care.[54] Applied subjects include market and legal remedies to spread or reduce risk, such as warranties, government-mandated partial insurance, restructuring or bankruptcy law, inspection, and regulation for quality and information disclosure.
Market failure
The term "market failure" encompasses several problems which may undermine standard economic [b]In many areas, some form of price stickiness is postulated to account for quantities, rather than prices, adjusting in the short run to changes on the demand side or the supply side. This includes standard analysis of the business cycle in macroeconomics. Analysis often revolves around causes of such price stickiness and their implications for reaching a hypothesized long-run equilibrium. Examples of such price stickiness in particular markets include wage rates in labour markets and posted prices in markets deviating from perfect competition.Information asymmetries and incomplete markets may result in economic inefficiency but also a possibility of improving efficiency through market, legal, and regulatory remedies, as discussed above.Some specialized fields of economics deal in market failure more than others. The economics of the public sector is one example. Much environmental economics concerns externalities or "public bads".
assumptions. Although economists categorize market failures differently, the following categories emerge in the main texts.
Policy options include regulations that reflect cost-benefit analysis or market solutions that change incentives, such as emission fees or redefinition of property rights.[59]Natural monopoly, or the overlapping concepts of "practical" and "technical" monopoly, is an extreme case of failure of competition as a restraint on producers. Extreme economies of scale are one possible cause.
Public goods are goods which are under-supplied in a typical market. The defining features are that people can consume public goods without having to pay for them and that more than one person can consume the good at the same time.
Externalities occur where there are significant social costs or benefits from production or consumption that are not reflected in market prices. For example, air pollution may generate a negative externality, and education may generate a positive externality (less crime, etc.). Governments often tax and otherwise restrict the sale of goods that have negative externalities and subsidize or otherwise promote the purchase of goods that have positive externalities in an effort to correct the price distortions caused by these externalities.[57] Elementary demand-and-supply theory predicts equilibrium but not the speed of adjustment for changes of equilibrium due to a shift in demand or supply.[58]
In many areas, some form of price stickiness is postulated to account for quantities, rather than prices, adjusting in the short run to changes on the demand side or the supply side. This includes standard analysis of the business cycle in macroeconomics. Analysis often revolves around causes of such price stickiness and their implications for reaching a hypothesized long-run equilibrium. Examples of such price stickiness in particular markets include wage rates in labour markets and posted prices in markets deviating from perfect competition.
Some specialized fields of economics deal in market failure more than others. The economics of the public sector is one example. Much environmental economics concerns externalities or "public bads".
Policy options include regulations that reflect cost-benefit analysis or market solutions that change incentives, such as emission fees or redefinition of property rights.
Public sector
Public finance is the field of economics that deals with budgeting the revenues and expenditures of a public sectorentity, usually government. The subject addresses such matters as tax incidence (who really pays a particular tax), cost-benefit analysis of government programmes, effects on economic efficiency and income distribution of different kinds of spending and taxes, and fiscal politics. The latter, an aspect of public choice theory, models public-sector behaviour analogously to microeconomics, involving interactions of self-interested voters, politicians, and bureaucrats.[60]
Much of economics is positive, seeking to describe and predict economic phenomena. Normative economics seeks to identify what economies ought to be like.
Welfare economics is a normative branch of economics that uses microeconomic techniques to simultaneously determine the allocative efficiency within an economy and the income distribution associated with it. It attempts to measure social welfare by examining the economic activities of the individuals that comprise society.[61]
(Source: https://en.wikipedia.org/wiki)
No comments:
Post a Comment